|
|
Post by Mastercaster on Oct 6, 2010 19:56:20 GMT -8
 Here is a 2009 Corvette ZR1 I'm playing with. Working on making marker lights out of resin. I removed the markers from the body.  I put tape in from behind and put some GE II clear silicone in to the front and let it cure to make a rough master for the first mold.  Here is a part from the 2005 snap kit I removed and made a mold of. Spent a lot of time polishing this part before making the mold.  Here is the first set of rough masters. Hopefully they will fit in their respective spots and I can sand them down to a nice flat surface. and make another mold.   Here is a 64 Buick Wildcat body I made. |
|
|
|
Post by danschevelle on Oct 7, 2010 21:24:37 GMT -8
Nice work! Are you going to have some of the 64 Buicks for sale? It looks great!
|
|
|
|
Post by Mastercaster on Oct 8, 2010 12:01:48 GMT -8
I will bring a couple tomorrow. I had to redo the silicone implant masters for my marker augmentation!
|
|
|
|
Post by Mastercaster on Oct 22, 2010 11:51:31 GMT -8
  Here is a set of marker lights in the ZR1 Roadster master. I made a set of wheels from the kit in clear and painted the back edge of the wheel red so the color carries through. The back wheel is from another set I made. They are made from clear resin with transparent black paint added.  The mold is made, here is the first body.  Here is a set of wheels I made with black transparent paint mixed with clear resin. |
|
